Technical Education Post

News and Information for Technical Educators

Woodworking Students Persevere

During a school year fraught with unexpected stops and starts due to the novel coronavirus pandemic, the Woodwork Career Alliance of North America (WCA) has already issued more than 200 Sawblade Certificates with hundreds more in the works.

High schools across the U.S. were impacted to varying degrees by the insidious disease. Most students had to adapt to splitting time in the classroom with taking classes online. Even schools that were open on a full-time or hybrid basis during the 2020-21 academic year would have to suddenly shut down for a week or two because of an outbreak. In addition, woodworking teachers had to keep their lesson plans flexible in the event individual students had to quarantine.

“This indeed has been a school year like no other and one that we hope we will never repeat,” said Scott Nelson, president of the WCA. “I’ve talked with many instructors who have shared the challenges they have faced. The Sawblade Certificate is an achievement always worth celebrating, but more so now than ever.”

Woodworking Teachers’ Tales
So, what has it been like to teach high school woodworking during a global pandemic? Six woodworking instructors, who have done just that and helped students earn their Sawblade Certificates to boot, share their stories.

Staci Sievert, technical education teacher of Seymour High School, Seymour, WI
My schedule this year only had me with Woods 2 and 3 students in the first semester. In this year of Covid, upperclassmen did not have to take what we would normally consider a full load as we were trying to limit the number of students in the building. As a result, I had fewer students in Woods 2 and 3 and we also had limited in-person days. Despite the challenges, all 11 of our Seymour students who attempted WCA certification, earned it.

The students’ biggest challenge was having very limited shop time to complete their projects and make time for certification. At the time I taught the Woods 2 and 3 students who earned the Sawblade certification, students were in-person two days a week. I modified lesson plans to accomplish what we could virtually to allow for as much in-person time as possible to be spent in the shop. It helped that we had 90-minute class periods with just half the students at a time, but students had to be very focused and often had to arrange to come back into the shop outside of regular class times.

I appreciate the WCA Sawblade certification process as it gives the Woods students a benchmark to reach for and achievement to celebrate. When I award the certificates, I also give the students a document that explains exactly what they did to earn certification so that it can be shown to a future employer or used on a resume. Most of my Woods students will go into manufacturing but not necessarily wood manufacturing. Regardless, earning the WCA Sawblade certificate is a valuable accomplishment since it shows that the student can safely operate equipment to precise specifications. This is an important skill regardless of what material is being processed.

Scott Bruening, technology education instructor, Kettle Moraine High School, Wales, WI
It’s been quite a year so far, to say the least. I will say we are seeing the light at the end of the tunnel here, which is fantastic.

We have been fully open since September with a few days of virtual instruction due to spikes in COVID-19 cases. We shut down as a school two times during the 2020-21 school year, once for two weeks in November and once for three days in December. In addition, throughout the year we have had kids who have been in and out to quarantine for 14 days. That put everyone at a different place as far as the progress and work completion goes. It was really hard to keep up with that early in the year but lately, with things normalizing, it’s been much better as far as student attendance goes.  It’s been a real juggling act this year and I know that both the students and myself are ready to put this behind us and have a restful summer break!

We had 13 earn their Sawblade Certificate in the first semester and are anticipating an additional 58 students will earn their certificate by June. We’ve moved the certification into our Woods I class, which accounts for the sharp increase in Sawblade certificates issued to students.

Additionally, it’s allowing us to keep going with additional tool points and hours for some students to earn their Green credentials. We’ll have students working on their Green credentials starting next year. Currently, we are working on curriculum adjustments to make the Green credential requirements work within our current class structure, too. We have basically what equates to three years of woods and are making adjustments to get the WCA certifications to fit in the Woods I class so that students can make that Green credential requirement with the additional required classes.

The students have done a fantastic job rising to the challenges that have impacted us this year. I think their continued flexibility has made it easy to continue to get them certified. For example, when we were occasionally forced to go from an in-person environment to virtual instantly, the students focused on measuring parts, which didn’t require equipment or being in the shop. The students’ ability to bounce back and forth was amazing.

The WCA Sawblade Certificate has been a fantastic program for our district and we are continuing to grow and expand our woodworking offerings along with the certification pieces. We are looking to certify even more students next year as things start to normalize.

The biggest challenge hasn’t been with the students; it’s been the spike in lumber cost and demand. We weren’t really impacted by the lumber costs as of yet. Our supply was not completely consumed from last year due to the closure for the remaining quarter and we were able to purchase wood last fall before it jumped in price. I must say it’s concerning for next year but for most of our local hardwoods, there has not been a massive jump in the price, unlike the construction lumber market. I just checked our suppliers’ prices today and the increase in the species we use was negligible.

Mickey Turner, woodworking I, II, and III teacher, John A Holmes High School, Edenton, NC
My school system, Edenton-Chowan Schools, has been in a plan B since August 2020. Our students are in two cohorts. Cohort A meets Mondays and Tuesdays and Cohort B meets Thursdays and Fridays. Some students, including teachers’ children and those who opted-in, are in class four days a week. We also have remote students.

So far this semester, my students have not completed the tool assessments, but I am anticipating 13 completions of the Sawblade certification by the end of the school year. Last semester, I certified 12 students in Woodworking 2. Three of the 12 were remote students who came into the shop on Wednesdays.

We succeeded because we were allowed to come back in person, with COVID 19 safety and masks. Hands-on classes are impossible to teach without hands-on. Hands-on without hands-on is just theory.

Greg Taylor, woodworking instructor, Mt. Airy High School, Mt. Airy, NC
Covid did not at all impact enrollment in my woodworking classes. Students were ready to come back. My numbers were very strong.

I had 24 students attain their certificates this year. We were fortunate enough to be face to face with our students in the fall and spring semesters. So, I did not have to navigate online instruction. I only give my level 2 and 3 students the chance to earn their Sawblade certificates because at that level the familiarity of the tools and concepts is somewhat easier to understand.

I was pleasantly surprised at how well the students wore masks. As far as social distancing, that was a little more difficult but not regarding equipment use. They are students after all. Students do not operate equipment normally in close proximity to one another anyway. I would wipe down desks between classes and students used readily available hand sanitizer.

Juliebeth Farvour, Tech Ed/STEM101 Teacher, Burlington, High School, Burlington, WI
How many of your students have earned their Sawblade Certificates so far this semester?

My woodworking classes are each one-semester courses. During the first semester, 25 students successfully obtained their Sawblade certificates. This semester, I plan on testing an additional 12 students. I hope to have 37 certified students at the end of this school year.

We spent most of the first semester in a hybrid schedule, with the month of November going fully virtual. Students attended in-person for 50-minute classes, twice a week and were virtual for two days. Wednesdays were a “make-up” day. This semester, we spent a quarter in a hybrid schedule but have now transitioned into a five-day a week, A/B block schedule. Students attend class in person for 90 minutes, every other day.

Giving students the experience they need, when only seeing them twice a week, was definitely the biggest challenge. Add on those students who had to quarantine and we really felt the time crunch. Under the circumstances, I worked to ensure that virtual days were spent on safety tests, vocabulary, measurement practice, and layout practice. In-person days were devoted to machine familiarity and completing projects. When we were in the hybrid model, we were allowed to have students come in on Wednesdays and that helped immensely. Then again, since I only had half of the students at any given time, there was less of a wait to use the machines and I was more able to give students the one-on-one attention they sometimes needed.

Students in the woods program want to be there and spend time in the shop, and they accepted that there had to change due to the pandemic. When I explained the new protocols — washing hands before and after class, lots of hand sanitizer during class, and masks in addition to their safety glasses — students grumbled but stepped up and were very good about compliance. They also took advantage of the Wednesday open shop hours and made up any time they lost due to quarantine.

Nick Daniels, skilled trades instructor, Avery County High School, Newland, NC
We have been on a somewhat hybrid schedule since the fall. The majority has been four days a week face-to-face and one day virtual. We recently moved to five days a week face to face. The biggest challenge has been keeping students in school and out of quarantine. As a result, there has been a lack of consistency in scheduling.

Last fall, I had three students qualify for their Sawblade Certificate. I anticipate that seven more will qualify before the school year ends.

I have about a fifty-fifty split of students who are half doing it only because I require the Sawblade test as their final exam and the other half because they are eager to please and have a desire to accomplish as much as they can in the time they have. This fifty-fifty split has been pretty consistent since I began offering the WCA certification regardless of the virus.

 

Source:

Richard Christianson -WCA

Scott Nelson
President
Woodwork Career Alliance of North America
snelsonwca@gmail.com

Leave a Reply

Your email address will not be published. Required fields are marked *

Upcoming Events